Care and Maintenance
Replacement window and door maintenance and cleaning
Inspect weatherstrip
Weatherstrip is a resilient material designed to act as a barrier in the space between the sash and frame to reduce air and water infiltration. Contact your local independent Infinity partner if your weatherstrip is damaged and requires replacement.
Examine finish
Examine your window or door’s interior and exterior finish. Periodic cleaning can extend the life of your finish.
Monitor exterior caulking
Inspect the exterior caulking around the outer edges of the window frame. Trim off any old, loose caulking and seal any gaps with a good quality caulk.
Check hardware operation
Check all hardware (locks, opening mechanisms, etc.) for smooth operation.
Tighten screws
Inspect exposed hardware screws and tighten if loose.
Clean moving parts
Clean any sand, dirt or dust from door and window hinges, sills and tracks.
Safety tip
When performing maintenance, always use caution on ladders. And don't forget to wear protective eyewear and clothing. When working with cleaning solutions, follow all recommended safety precautions and dispose of these materials according to the manufacturer's instructions.
How to clean glass
Do not clean glass when it is exposed to direct sunlight
Exercise special care when cleaning coated glass surfaces
Soak with clean water to loosen dirt and debris
Use an approved cleaning solution
Dry all cleaning solution from window gaskets, sealants and frames
Do not use abrasive cleaning solutions or materials
Do not use scrapers of any size or type
How to clean screens
Remove screens and lay them on a clean, flat surface
Not sure how to remove screens? The Infinity Owner's Manual has complete instructions for every product
Spray off any dust and debris with clean water
Allow the screens to completely dry before replacing
Always work from the exterior of the door when removing and replacing door screens
How to clean Ultrex® fiberglass
Remove dirt by washing with an approved cleaning solution
Clean with a soft cloth or soft brush to remove any bugs, grime, dirt or dust
Do not use an abrasive applicator or use extreme pressure
Rinse with clean water
No solvents, paint thinner, or other chemicals should be used
How to clean hardware
Use a clean, soft, damp cloth to polish and remove fingerprints from window and door hardware
Do not use household cleaners, window cleaning solutions, abrasive cleaners, bleaches, solvents, polishes, or other chemicals unless specifically recommended by the hardware manufacturer
Keys, rings or other sharp objects should be kept from striking the hardware
How to clean EverWood®
Clean the surface with a damp cloth soaked in warm water
Wipe down with a dry cloth and allow the surface to thoroughly dry
If the surface has become soiled try cleaning with an approved cleaning solution
Rinse off cleaning residue with warm water and let thoroughly dry
Do not sand the surface